Saeco Classico Espresso Machine O-Ring Kit Parts

December 9, 2020 - Comment

Leaking steam wand? Leaking steam valve? This is a set of 6 o-rings that fit the Saeco Classico or Aroma Espresso Machine Model SIN 015. These o-rings are the complete set for the steam valve and the steam wand. It includes the o-rings only, the picture with the steam wand assembly is shown for illustration

Leaking steam wand? Leaking steam valve? This is a set of 6 o-rings that fit the Saeco Classico or Aroma Espresso Machine Model SIN 015. These o-rings are the complete set for the steam valve and the steam wand. It includes the o-rings only, the picture with the steam wand assembly is shown for illustration only, to show where the o-rings go and which ones you get. You get: (2) o-rings that fit the shaft of the steam valve. If water is leaking from around the steam valve, behind the control knob and dripping down, these are the o-rings that go there NM02001 (1) o-ring that fits at the nut that joins the steam wand to the bottom of the steam valve 140321861 (2) o-rings that fit in the middle of the steam arm 140320200/140324461 (1) o-ring that fits near the end of the stem wand between the plastic wand and the metal tip 140324761 The location for the o-rings on the wand are shown. The two o-rings at the top for the steam valve go on the steam valve shaft, which screws out and can be removed after removing the washer and clip that hold it on. That’s a total of six o-rings, you get the o-rings only, THE STEAM WAND AND TIP ARE NOT INCLUDED. If you order by noon EST I usually have it out the same day from NJ. If you have any questions if it will fit your particular machine, please feel free to ask.

Comments

Write a comment

*

Home Privacy Policy Terms Of Use Medical Disclaimer Contact Us Affiliate Disclosure DMCA Earnings Disclaimer